Bamboo Composite resort in Jimbaran

New picture!

2008-04-10T01:21:00.001-07:00

Floor plan and environment design

2008-03-18T20:21:00.000-07:00

In the previous posts one could see some of the concepts of the floor plan for the villas. As usual one keeps making small adjustments to find the perfect design. In the following pictures one can find the new concepts. In these drawings one can also see the swimming pool around and underneath the villa.
.

Floor plan for one bedroom villa
.

Floor plan for two bedroom villa
.
Floor plan for three bedroom villa

Two and Three bedroom villas

2008-03-11T19:11:00.001-07:00

To start with, only a one bedroom villa was designed. Now the design of this villa is finished, the design of the two and three bedroom villas has started. To be able to add one or more bedrooms and still keep the same amount of living space, a third module has to be added to the villa. On the outside, this module will be the same as the two modules that form the one bedroom villa. In the pictures below one can find the floor plans of the villas, which are chosen from a wide range of concepts.

With this pictures one has to keep in mind that:
- This space represents only the flat floor of the villa, not the slanting walls.
- The furniture is just there to give an impression of the space
- The lines in the drawings represent the sections which are in the window frames/walls

..... Floor plan of one bedroom villa

..... Floor plan of two bedroom villa

..... Floor plan of three bedroom villa

Building site

2008-03-11T19:09:00.000-07:00

In the mean time the first steps of preparing the actual building started as well. As one can see in the pictures below, all the vegetation and other unwanted material have been removed from the place, the first villa (mock-up) is going to be built. Next to this spot, an office is going to be made ready for the engineering work and a start is made with building a workshop out of bamboo. All the composite panels will be produced on the site in order to lower transport expanses and prevent damage.
.

... Building location, cleaned.............................................Building location, with location of pool...

.

... Workshop.......................................................................View...

Materials

2008-03-11T03:46:00.000-07:00

The next step is to find the right materials. In order to make a fully composite shell structure, which is able to withstand high loads and environmental impact, one cannot use any general material. The sandwich structure used for the roof and the side walls will exist of two components; woven bamboo mats with epoxy resin facings and a foam core.

The bamboo mats will be woven in a traditional Balinese village near Ubud. Because labor is relatively cheap, all the mats will be woven by hand. A specific type of bamboo is used in order to create the right properties required for the panel. To make the material even stronger, only the best part of the bamboo is used. In this case the best part means the outer part of the bamboo, just below the ‘skin’. In this part the best vascular bundles exist with a high density.

The resin, that is going to be used for the bamboo laminates, is still an issue that needs some more research. To find the best resin, that is available in the area, some samples have been ordered and tests have to be done. One of the important criteria, next to the mechanical properties, is the pot life (time you have to apply it to your product, before it starts to cure and become thick) and the viscosity (how liquid the resin is and how easy to apply). After doing some tests (see pictures below) with several resins, these points turned out to be critical for a lot of resins. Therefore more tests are required.
.

Start of the project

2008-01-31T02:06:00.000-08:00

Before the actual start
Gerard van Vloten of D.A.D. Bali (Design and Development), designer/architect on Bali had an idea. He wanted to build a sustainable house in a non traditional way. He wanted a symbiosis between culture and nature, between technology and ecology, between man and his environment. Therefore he was looking for a way to use bamboo as a composites material. Therefore he found a lot of information on the internet, but he also found out that Delft University of Technology was working with natural fiber composites as well. After some time of exchanging information by email, one decided that is was time to start working on it for real. Therefore two students (Chris Feddes and Ramona Steenbreker) of the faculty of Aerospace Engineering traveled to Bali on the 6th of January. Having this multi-disciplinary team, we should be able to combine a good looking design (architect) with a lightweight structure made of natural materials (aerospace engineers).

Start of the project
During the first week, it became clear that the land (with a extremely nice view: see picture) was already available and ready to be used to build on. So the designing of the house could be started immediately. To start with, some already existing designs were looked at. In the pictures below one can see the furniture house of Shigeru Ban (Japanese) and a furniture house designed by Rob Sample (Australian).

Both houses should be built with short fibers. This ‘material’ requires a specific technique and provides a specific look. But working with continuous fibers will be a bigger challenge and the looks will be even more astonishing. In order to be able to use continuous fibers a new design had to be developed. The first idea was to make a cubic house with a cubic sleeping area inside. This is not so new, therefore one tried to changed that concept completely, also to make it a better design for the tropical area it is going to be built in. So we kept changing the design step by step, from cube to container shaped etc. One night we were talking about the way aircraft wings can be built and the next day we changed the design dramatically into a completely different shape. The roof now looked like a wing profile.

This last picture shows the final design (Marquette and 3D impression):

Bamboo Composite Balinese House

2008-01-29T07:16:00.000-08:00

General information

A new era started. Houses no longer have to be built out of wood, concrete, bamboo culms, and roof tiles. We leave the traditional way of building behind us and start a new way of thinking. Think lightweight! To be able to built a lightweight structure one needs to use the available materials in a different way. We chose to use an ancient material, which was used for houses for ages. Bamboo! When one combines the strongest part of the bamboo, the fibers, with a polymer resin like epoxy, one can create an extremely strong and light composite (fiber reinforced plastic) material.

Bamboo
There are over 1.250 species of this extremely fast growing grass. A Bamboo shoot grows out of a network of roots. When one shoot dies another one already started to grow. Therefore a Bamboo House grows itself in a short time. The properties of the Bamboo are dependent on the type of Bamboo, the place they grow, the time of harvesting etc. So there are a lot of variables when working with Bamboo. When using only the Bamboo fibers, there are even more because the fiber properties are dependent on their place within the Bamboo. When building a light weight house, one needs the best!

Pictures: Bamboo Foundation;
..Arief next to Bamboo shoot ........................................1 week later (grow 30 cm per day)

Bali
Bali, one of the 17508 islands of Indonesia, which is positioned 8o south of the equator. Bali is in many ways different from the other parts of Indonesia, stating from their religion. On Bali most people are Hindu instead of Muslim. Therefore many different rules are applied, also when designing a house. The height of house can for example not exceed the height of the highest palm tree (≈ 20m). The climate is another mayor factor. The temperature on Bali on average is between 25 and 35 degrees Celsius and during the monsoon season there can be heavy rainfall (average 30 mm per time in February). Besides this, there is the always salty air and an enormous amount of ‘aggressive’ bugs.

Sustainability
In the time that the environment gets more and more polluted, one should start thinking in a sustainable way. A first start is the use of the fast growing material, Bamboo. When a culm of bamboo is harvested, the next one is already growing as well. It takes years for the network of roots to die.
When the structure of the house is finished, micro-climate ecosystems will be installed to generate power and hot water. This is not only good for the environment, but also for the bill payers once it is established.